home *** CD-ROM | disk | FTP | other *** search
/ Chip 1998 February / CHIP Şubat 1998.iso / drivers / GRAFIK / HERCULES / TERM / WIN95 / MPEG / T64VIDEO / MPEG.OLD / WIN95DIR.Z / CPX.INI < prev    next >
Encoding:
INI File  |  1995-08-24  |  6.2 KB  |  109 lines
  1. [Hardware]
  2. BoardType=Combo
  3. ClockDivider=444
  4.  
  5.  
  6. ; The [Hardware] section should contain one of the following formats,
  7. ; depending on the type of ScenicMX2 board to be supported:
  8. ;
  9. ;-------------------------------------------------------------------;
  10. ; 1.  "S3 Inc. Scenic/MX2 & Trio64V PCI TMP Board"                  ;
  11. ;     (all-in-one Combo board)                                      ;
  12. ;                                                                   ;
  13. ;     or                                                            ;
  14. ;                                                                   ;
  15. ;     "S3 Inc. Scenic/MX2 Daughter Card" mated with                 ;
  16. ;     "S3 Inc. Trio64V 1-2MB PCI TMP Board" (daughter card Combo)   ;
  17. ;-------------------------------------------------------------------;
  18. ;     [Hardware]
  19. ;     BoardType=Combo            ; S3 PCI Combo Board.
  20. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  21. ;                                ; IRQ and IRQ Letter are determined by driver.
  22. ;                                ; In this configuration, any other settings
  23. ;                                ; such as IRQ or IRQLetter are ignored.
  24. ;
  25. ;-------------------------------------------------------------------;
  26. ; 2.  "Tiger Board"                                                 ;
  27. ;-------------------------------------------------------------------;
  28. ;     [Hardware]
  29. ;     BoardType=Tiger            ; Tiger Board.
  30. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  31. ;                                ; IRQ and IRQ Letter are determined by driver.
  32. ;                                ; In this configuration, any other settings
  33. ;                                ; such as IRQ or IRQLetter are ignored.
  34. ;
  35. ;-------------------------------------------------------------------;
  36. ; 3.  "S3 Inc. CP3 Validation Board" (ISA card) connected to        ;
  37. ;     "S3 Inc. Trio64V 1-2MB PCI TMP Board"                         ;
  38. ;                                                                   ;
  39. ;     or                                                            ;
  40. ;                                                                   ;
  41. ;     "S3 Inc. CP3 Validation Board" (ISA card) connected to        ;
  42. ;     "S3 Inc. Trio64V 1-2MB VL TMP Board"                          ;
  43. ;-------------------------------------------------------------------;
  44. ;     [Hardware]
  45. ;     BoardType=                 ; S3 ISA CP3 Validation Board.
  46. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  47. ;     IRQ=7                      ; Fixed ISA IRQ line to be used.
  48. ;                                ; Note: IRQ must be between 3 and 7.
  49. ;                                ; Note: IRQ letter is determined by driver
  50. ;                                ; by default, assuming an S3 ISA CP3 board.
  51. ;
  52. ;-------------------------------------------------------------------;
  53. ; 4.  Example of a user-defined PCI board in which Scenic/MX2       ;
  54. ;     shares a PCI IRQ line with Trio64V+.  In this configuration,  ;
  55. ;     the driver will determine the IRQ number automatically.       ;
  56. ;-------------------------------------------------------------------;
  57. ;     [Hardware]
  58. ;     BoardType=                 ; Example for a user-defined PCI board.
  59. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  60. ;     IRQ=Trio64V                ; Use PCI IRQ line assigned to Trio64V.
  61. ;     IRQLetter=PCI              ; Use PCI interrupt pin on ScenicMX2.
  62. ;
  63. ;-------------------------------------------------------------------;
  64. ; 5.  Example of a user-defined PCI board in which Scenic/MX2 has   ;
  65. ;     its own IRQ line, separate from Trio64V+.  The IRQ number     ;
  66. ;     must be supplied by the user or by a configuration utility.   ;
  67. ;-------------------------------------------------------------------;
  68. ;     [Hardware]
  69. ;     BoardType=                 ; Example for a user-defined PCI board.
  70. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  71. ;     IRQ=9                      ; Fixed PCI IRQ line to be used.
  72. ;     IRQLetter=PCI              ; Use PCI interrupt pin on ScenicMX2.
  73. ;
  74. ;-------------------------------------------------------------------;
  75. ; 6.  Example of a user-defined ISA board.  The IRQ number must be  ;
  76. ;     supplied by the user or by a configuration utility.  In this  ;
  77. ;     example the IRQ letter, which specifies which pin on the      ;
  78. ;     Scenic/MX2 chip will be used for the IRQ, is set to a fixed   ;
  79. ;     value (IRQ pin A).                                            ;
  80. ;-------------------------------------------------------------------;
  81. ;     [Hardware]
  82. ;     BoardType=                 ; Example for a user-defined ISA board.
  83. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  84. ;     IRQ=7                      ; Fixed ISA IRQ line to be used.
  85. ;                                ; Note: IRQ range depends on board hardware.
  86. ;     IRQLetter=A                ; Fixed IRQ pin to be used on ScenicMX2.
  87. ;                                ; Note: IRQ Letter must be between A and E.
  88. ;
  89. ;-------------------------------------------------------------------;
  90. ; 7.  Example of a user-defined ISA board.  The IRQ number must be  ;
  91. ;     supplied by the user or by a configuration utility.  In this  ;
  92. ;     example the IRQ letter, which specifies which pin on the      ;
  93. ;     Scenic/MX2 chip will be used for the IRQ, is calculated from  ;
  94. ;     the IRQ number by using a string that shows how each IRQ      ;
  95. ;     number should be mapped to a corresponding IRQ letter.        ;
  96. ;     This scheme is used if the IRQLetter string contains 16 or    ;
  97. ;     more characters.                                              ;
  98. ;-------------------------------------------------------------------;
  99. ;     [Hardware]
  100. ;     BoardType=                 ; Example for a user-defined ISA board.
  101. ;     ClockDivider=444           ; MCLK speed (40 MHz).
  102. ;     IRQ=7                      ; Fixed ISA IRQ line to be used.
  103. ;                                ; Note: IRQ range depends on board hardware.
  104. ;     IRQLetter=000ABCDE00000000 ; List showing how IRQ number is mapped
  105. ;                                ; to corresponding IRQ letter.  For example,
  106. ;                                ; IRQ 7 is mapped to IRQ letter E.
  107. ;                                ; Note: valid IRQ letters are A to E.
  108.  
  109.